Used Magnetic Pulser Coils BBMPulser 2 Part Handle. lot or 4

Description

This are all coils that were in service or were rejected for different defects, such as plastic went up too fur the handle or LCD Indicator doesn't work
All are working but some may need some repair done
Sols as one lot
As is no. warranty on this coils.
2 coils aluminum, 2 coils are copper (fur 2)
All coils have thermal switch build in. All thermal switches work.
Shipped with USPS Priority Mail.
BBMPulser brand. website www.bbmpulser.org
Here is the link where this coil being tested on BBMPulser 6S Unit
https://youtu.be/5W4xjqFSIDI
https://youtu.be/-KXwPnkkVqI
Coil made of 14AWG Copper Magnet wire and 13AWG Aluminum magnet wire
Some later models of Coils are filled with the Flex it 90 resin inside between layers and windings making it very quiet while operating at high power (4Tesla and Up)
Some Coils Handles are made using 2 different resins, handle itself is made of hard white plastic,  semi-clear rubber resent around the coil is made of Flex-it 90, its hard but has slightly rubber to it, allows expansion of the coil when it gets hot.
You will have total 4 wires for connection:
1x12 AWG pair - 5.5' long wires for coil
1x18 AWG pair - 5.5' long wires for thermal switch and South Pole LED Indicator
So this Coil has build in thermal switch and build in South Pole LED indicator.
You don't have to use it (this build in thermal safety) but its recommended, it's very easy to implement.
Build in 50C thermal switch, it's slightly offset to trigger when coil gets hot around 85-90C and automatically resets back when coil cools off ~ 80%.
You will get picture with wiring diagram showing how it's wired inside.
Also you will get my support via Email
your tech Andrey D
Russian Device Vibroacoustic Vitafon Boxed with russian manual.
Good working condition. Sold as is. Please check the pictures.
Attention !!! Please note that this device operates on a 220 volt network.
The vibroacoustic device "Vitafon" is used to treat and prevent various diseases of an inflammatory and traumatic nature. It has a wide range of indications and applications. High treatment efficiency is achieved by a multiple increase in microcapillary blood flow and lymph flow in the affected area.
The device in a contact way creates microvibration of tissues through a constantly changing sound frequency. Frequency change within the set limits and the transition from one range to another occurs automatically according to the program.
The frequency of the I range continuously varies from 20 Hz to 4.5 kHz and is optimized to maximize the effect of a hydrodynamic pump in the veins.
The frequency of the II range continuously varies from 200 Hz to 18 kHz and is aimed at increasing the effect of reducing the hydrodynamic resistance in the capillaries.
The device is intended for use in medical and sanatorium institutions, as well as for use at home, outpatient clinics and hospitals.
Worldwide shipping with tracking number.